Having a dog as a pet is definitely a lovely experience, but it must be the same for the pet as well. As a dog owner, you need to observe whether your dog is getting the right treatments. It is not only the bathing schedules and the diet that needs to be taken care of, but it involves grooming sessions as well.
Grooming a dog is an essential routine that a dog owner must get into. Well, it might seem simple, but in actuality, it is not, unless the professional uses it. They know it better and hence do it better. But if the owner wishes to groom their pet by themselves, there is something to learn about dog clipper blades.
Also Check:
- Dog Collar Size Chart | Recommend Sizing Guide By Breed & Weight
- Dog Diaper Size Chart
- Dog Door Size Chart
- Dog Harness Size Chart
- Dog Crate Size Chart
- Dog Bandana Size Chart
What is the Dog Clipper Blade?
The foremost is the dog clipper blade. The fury pups like huskies, golden retrievers, shed a lot, and if not taken care of properly, it could lead to skin irritations and ultimately be extremely uncomfortable. These breeds require a scheduled shaving time where the clipper blades are used to shed the fur.
The clipper blades are of different types and sizes, each appropriate for different breeds. Different clipper blade sizes are available, and they must be chosen according to the dog breed, the haircut, and the part of the body. Before we check the Dog Clipper Blade Size table & clipper guard size, here is a little insight into different types of clipper blades.
What are the Different Types of Dog Clipper Blades?
If you have ever taken your pet to a professional groomer or have gone with one of your friends, you might have observed the expert using different blades while shaving different parts of the body. It is because a blade has different sizes and they are purposely built to take care of the different parts of the body. Avoid trying using the same blade for the feet, the body, the head, and the tail, as you would do nothing but increase the risk of a cut. Hence to get different results, you need to choose the right clipper blade.
a. Ceramic and steel.
Usually, the metals like Titanium, silver, or Carbon are used to make the clipper blades. These steel ceramic-made dog clipper blades are durable, lightweight, and, most importantly, affordable. Unlike the Steel blades, the ceramic grades are non-conductor of heat and therefore do not get hot. They even do not get blunt; therefore, they need not be sharpened repeatedly.
b. Skip Tooth Clipper Blades.
The dogs with thick fur need the skip tooth clipper blades. Unlike other blades, it has rare teeth and does not file one. These blades come with a clipper as an option. These are best used when the groomer wants to trim the hair, especially the long hair, before getting deep. So the initial stage of trimming needs the skip tooth clipper blades.
c. Fine tooth blades.
The fine-tooth blades have fine teeth. It is best for trimming or could be better used to smooth out the trimmed hair. It would be a bad idea if anyone uses the fine-tooth blades for cutting the hair, especially the thick fur. They need to face and extreme difficulty, to chop the hair since the fine to the blade is not built with this purpose. Therefore it is essential to choose the right blade and the right size for trimming or cutting the hair of the dogs.
How to Find the Right Clipper Blade Size for Your Dog?
Knowing your pup well would resolve the majority of the confusion. If you are sure about the breed you have, and its common features like shedding the fur and other habits. It would help you to know the right blade.
a. Know your breed.
A dog owner must be sure of the breed, he or she owns. Any confusion in that could invite many other problems and not only confusion of which size of clipper blade to purchase. Having said that, if you know your breed well, then you know how it behaves and what irritates it and what doesn’t.
Well, a dog clipper blade size chart would also help you to a great extent. Just follow the chat and see where the breed of your dog comes and there you will find the other specifications.
For example, if you want to shed the body fur of a Retriever, the clipper blade size would probably run between 5to7, whereas for the poodles, it will be 7.
b. Part of the body.
The parts of the body are one of the essential factors that must be considered to be able to choose the right blade for your pup. Of course, it considers the breed as well. Different parts especially the body, head, legs, and tail require different types of clipper blades. Not only the size of the clipper but there are numbers for the blades as well that need to be seen. We have an entire chat based on the formula provided below refer to it for further clarification.
What is the Difference Between Different Blade Numbers?
The clipper blade has numbers that start from 3 and ends at 50. The blade with small numbers leaves half inches or 13 mm of hair, whereas the blade of size 50 can live up to1/125 inches. The 50 size clipper blade is specifically made for shorter surgical cuts.
Dog grooming blade size chart.
Whether you are a professional or a beginner in the profession, or a dog owner looking forward to grooming your own pop, always refer to the dog grooming blade size chart. Pick up the blade according to the breed you own, the part of the body you want to shave, and the cut you want.
If you need a slight trim, then choose the blade size accordingly. But if you want a full haircut, then the blade size would be different. It is better to take the reference of professionals before purchasing it. It must be remembered that when you invest in a blade make sure it lasts long and doesn’t hurt your pet.
Dog Clipper Blade Size Chart For Different Parts of the Body
Part of the body | Retrievers |
Terriers |
Spaniels |
Setters |
Poodles |
Body | 5-7 | 5-7 | 4-7 | 4-7 | 7 |
Head | Scissors | 10 or scissors | 10-15 | 7-10 | 10-15 |
Legs | 5-7 | 10, 30 or scissors | 7 | Scissors | 3-5 |
Tail | Scissors | 4-7 or scissors | N/A | Scissors | 10-15 |
Recommended Dog Clipper Blade Numbers and Lengths of Cut
Clipper Blade Number | Description of Cut |
---|---|
Blade #3 or #3F | Cuts and leaves 1/2″ or 13mm length of coat on the dog |
Blade #4 or # 4F | Cuts and leaves approximately 3/8″ or 9.5mm length of coat |
Blade #5/8 Toe Blade | Is specifically for clipping between the toes and feet |
Blade #5 or #5F | Cuts and leaves approximately 1/4″ or 6mm length of coat |
Blade #7/8 Toe Blade | Is specifically for clipping between toes and feet |
Blade #7 or #7F | Cuts and leaves approximately 1/8″ or 3.2mm length of coat |
Blade #8 1/2 | Cuts and leaves 7/64″ or 2.8mm length of coat |
Blade #9 | Cuts and leaves approximately 5/64″ or 2mm length of coat |
Blade #10 | Cuts and leaves 1/16″ or 2mm length of coat |
Blade #15 | Cuts and leaves 1.2mm length of coat |
Blade #30 | Cuts and leaves 0.5mm length of coat |
Blade #40 & #50 | Are specifically for short surgical cuts |
Dog Ideal Clipping Size Chart by Breed
Breed |
Details |
Afghan Hound |
|
Airedale Terrier |
|
American Cocker Spaniel |
|
Bearded Collie |
|
Bedlington Terrier |
|
Bichon Frise |
|
Bouvier Des Flandres |
|
Briard Terrier |
|
Cairn Terrier |
|
Chow Chow |
|
Cocker Spaniel |
|
Collie |
|
Dandie Dinmont |
|
English Cocker Spaniel |
|
English Setter |
|
English Springer Spaniel |
|
Golden Retriever |
|
Great Pyrenees |
|
Irish Setter |
|
Irish Terrier |
|
Keeshond |
|
Kerry Blue Terrier |
|
Lakeland Terrier |
|
Lhasa Apso |
|
Maltese |
|
Newfoundland |
|
Old English Sheepdog |
|
Pekingese |
|
Poodles – Kennel Trim |
|
Poodles – Lamb Trim |
|
Poodles – Summer Trim – Bikini Trim |
|
Portuguese Water Dog |
|
Samoyed |
|
Schnauzer |
|
Scottish Terrier |
|
Sealyham |
|
Shetland Sheepdog |
|
Shih Tzu |
|
Silky Terrier |
|
Soft Coated Wheaten Terrier |
|
Welsh Terrier |
|
West Highland White Terrier |
|
Yorkshire Terrier |
|
Mixed Breeds – Curly Coat |
|
Mixed Breeds – Wiry Coat |
|
Mixed Breeds – Smooth Coat |
|
Cats |
|
Note: All our size charts are guidelines.
Please do keep in mind Sizes may vary with brands, models and manufacturers. This is why, we can not guarantee that our size charts will always produce the exact right sizes. If you are a store or brand owner, feel free to reach us and we would list your sizing charts with the brand name.